Hubcore

HUBCORE · v13.11.31.155
Offline
What are you doing? Tap one — the camera opens straight away.
More options (courier, photos, scanner gun)
No case selected
📟 Scanner ready — scan a label
No camera needed on a computer. Every label you shoot lands in the list below.
0
scanned
📷
Tap to Open Camera
Point at tray QR code or barcode
This case0 scans
🔎 Where is it?latest status of every tray
0Loaded
0Delivered at destination
0Recovered
0At hub location
0Flagged
↓ Pull to refresh
📅 Calendar
⏱ Timing · drivers

Staff only. Arrival = "I'm here" stamp (📍) or the first scan at the stop; dwell = arrival to last scan there; transit = previous stop's last scan to this arrival. Drivers never see this screen.

⚠️ Exceptions

Sorted so you can keep up: what needs a person now, what has gone stale and needs one decision, what somebody already owns, and flagged labels. Snooze what you have dealt with. Tap a case to open it.

Aesculap containers

Where every container is now, how long it has been out, and which hospitals hold them past the normal turn.

🗺 My route

Your stops for today in the order the hub set them. Tap Deliver / Pick up on a stop to scan; a stop leaves the list when every tray on it is scanned (or marked not available).

HUB · DISPATCH
📡 Live feed
0Loaded
0Delivered at destination
0Recovered
0At hub location
0Flagged
Live feed
  • Waiting for scans…
📈 Status · sales view
📈 Set statuswhat the sales team sees

Latest status of each tray: In truck · leaving hub · Delivered · Recovered (RCVRD). Tap 💬 on a case to text its summary to someone.

📋 Count

🚚 Shipping & Receiving

🧩 Parts

🗓️ My day

⚙️ Setup

Cases the office sends over land on their own day by themselves — hospital, surgeon, team, folder and every set come with them, and the drivers just scan. Nothing here needs tapping; this is the receipt. Tap a case only if you want to make it the active case right now.

Look here when someone says the app is slow, frozen or out of date. The line below is the answer; the phone-by-phone list is folded underneath for when you need to find one phone.

Tap this on any phone that will not scan. It tries every camera setting in turn and reports what the phone actually gave back — and sends the result here so it can be looked at without the phone in hand.

👤 EMPLOYEE

Signs you in properly, so every scan carries your name. You will be asked to set your own password the first time.

For a budget phone that answers taps slowly. Fewer case cards per screen, a 720p camera instead of 1080p, no text-reader preload, and more space between refreshes. Everything still works — it just stops doing background work the phone cannot afford. Reload the page after switching it on.

Sales reps pick their team and see only their team's deliveries. Hub staff and Admin positions are granted by the admin on the roster.

Saved on this phone and on the shared roster, so on any phone you just tap your name on Set Tracker.

One employee per line: Name · HUB · role · work email. The role is driver, staff, rep or admin — leave it out and the person is a driver. The email is what lets them sign in with a password; employees without one just tap their name on the Scan tab.

Publishing replaces the whole roster. Paste everyone, not just the new people — anyone left out is removed. PINs and emails already saved are kept.

Off, everyone picks their name from the roster. On, a 🔐 Sign in with work email button appears; a person signs in once with the password you set for them in Firebase, is made to change it, and the app then knows exactly who they are on every scan. Only people whose roster line carries an email can sign in — the rest keep tapping their name.

One person's scans on one day that show a place (or a case at that place) where the trays were NOT. List first; then Fix voids them, adds one "Received at HUB" per tray at the hub you pick, on the tray's own case, and undoes any rulebook (R2) move they caused.

Before v11.80 a case left active on Hub receiving flagged other cases' trays as "not part of case" and received trays with no delivery on record without a case. This lists today's receipts that were flagged, left with no case, or credited to the case's driver instead of the person who scanned them, and fixes each. Scans that were refused ("Not recorded — case … asks for …") were never saved: scan those trays again.

The public Mapbox token (starts with pk.) gives the Fleet map its Mapbox streets. Without it the map uses free OpenStreetMap streets. Saving it does not switch the route optimizer on.

Which Hubcore driver each Geotab driver is. Pre-filled by name; used for "parked at a hospital with no scan".

Lists the open cases R1–R3 would close, with the reason for each, and the sets that still need an R4 answer. Opening it changes nothing.

Paste from Excel — one row per set: Record ID, Hospital, Surgery Date, BOM, Set ID, Team, Rep, Surgeon (tab or comma separated; Team, Rep and Surgeon optional — they power the team search and the sales page). Header row is skipped automatically.

The VB reader (built in, no licence) reads the QR Code Model 1 tray labels, with ZXing on every frame and jsQR behind it. There is no paid reader and no licence key — Dynamsoft was removed in v8.16.

Set directory loading…

If you have a list of tray label codes, paste it here so trays are recognized before anyone scans them: Code, BOM, Set ID, QTY, QTY OF TRAY per row. Trays not in the list are learned the first time a driver scans them.

Install on phone: open this page in Safari (iPhone) or Chrome (Android) → Share / menu → Add to Home Screen. It will open full-screen like an app.
Scanning0
↻ Turn the phone upright — the scanner works portrait
Send update
status image
To the team, with MABHUB and MABHUB Drivers copied. Sending it finishes the case.
Other ways to send
What are you doing?
Then point the camera at the case sheet QR, then at each tray.
Trays not scanned

A set on this case has trays that were not scanned. Say what happened with each one — the question comes back on every later delivery for this case until the tray is scanned or marked not coming.

Assign
⚠ Not on this case — what is it?
✎ Edit scan
✎ Case info

Fills in what the case sheet would have carried. Scans are not changed. Sales sees these on Status and in the texts.

👋 Welcome to Hubcore

One-time setup on this phone. Pick your name from the roster and enter your PIN (or choose one). The phone remembers you from then on, through every update.

Or sign in with your work email.

✍️ Record sets without scanning

Nothing added yet
🔐 Sign in

Use your @vbspineco.com email and the password you were given.

📋 Received at the hub
📦 Mark delivered

✎ Scans on this case

▶ Start a case
Scan the sheet, or pick one below.
Case
🧰 Set
✎ Correct the Record ID

Every scan on this case moves with it, and each one keeps a note of the Record ID it was scanned under. This is not an extension — nothing is delivered or picked up.

⏳ Extend in the field (EIF)

📥 Receive at the hub

Trays coming back to the hub, grouped by case. Tick everything that is on the shelf now — a whole case with one tap, or only the trays that came in. Each tick records Received at HUB exactly like a scan.

Back at the hub

Trays this case still shows as out. Tick the ones that are at the hub — they never went, or they came back without a pick-up scan — and say which. A hub record is written for each, in your name; nothing already recorded is changed.

🔁 Change status

A whole run scanned under the wrong status — delivered when it was still on the truck, say. Tick the scans, choose what they should have been, and save. Times and trays are untouched; the original status is kept on each record for audit.

🕒 Change scan time

When a scan was recorded late (e.g. delivered yesterday, scanned today), set the real date and time here. The original time is kept on the record for audit.

Lot / Set ID not in the directory

The set directory has 793 sets and this ID is not one of them. Either the label was misread, or it is a real set nobody has added yet. Both are one tap.

🏷 Label will not scan

Just give us the Lot / Set ID — we fill in the rest from the history. Record the tray now with "Record a tray without scanning" so the case is still correct.

Add a tray number or a note (optional)
🧩 New part — what is this?

Already recorded by its GTIN, with its lot and expiry. Type the REF printed next to the barcode (e.g. 48851313A) — the app remembers it for every future box with this GTIN. Asked once.

🔒

This phone is blocked

Scanning is switched off for this device. Ask the hub to unblock it.